Foreign Perspectives

Archive for September, 2025

This started out reasonably easy but the family have been adding requirements as the months have gone by, some directly from our experiences on our scouting trip a few months ago and some as we’ve collectively looked at properties online and thought some more about what we each need.

The basic requirement are for a house with three or more bedrooms, a few hectares of land, and costing up to A$1,000,000 (about £500,000). Prices will have changed by the time we’re actually moving, but we’re currently using that as a ball-park in our searches.

Location is always important and we’ve two slightly conflicting requirements with this because Wendy and I will essentially be retiring but the boys will be wanting jobs. Therefore it can’t be too far away from employment centres and in that respect we’re thinking of at most 30 minutes drive from either Launceston or Hobart. We all prefer Launceston but most properties in the recent searches are near Hobart.

As in our move to France, we’ll likely turn up with a massive load of stuff in boxes and therefore we want somewhere that we can store it all. That seems not to be an issue as almost all of the properties turning up in our searches come with assorted store rooms and even buildings.

Although three bedrooms is our minimum requirement, many of the properties that we’ve looked at come with four and a couple of bathrooms which is handy as that second bathroom was added as a requirement to avoid the morning rush.

Heating-wise, the houses generally come with “reverse-cycle airconditioning” (heat pumps) and many with log stoves. In a number of instances, the logs would be supplied by chopping down trees on the property itself. Quite a lot of the houses come with solar panels and in some cases enough to run everything, at least during the day (batteries are prohibitively expensive).

Recently, it has come to our attention that internet access isn’t a given in Australia so we’re specifically looking for that now (it’s called NBN there and comes in the usual cable, fibre, and satellite versions). On a related note, it turns out that TV also isn’t a given and some places that are well within our 30 minute range don’t have much, if any, TV reception (you can check this out at Digitalready). This isn’t a showstopper as there’s a subsidised satellite service (VAST) available in those areas, but something to consider. Incidentally, our French approach of just bringing the Sky box along won’t work as the Sky satellite doesn’t point anywhere near Australia so no FreeSat either. Other things that won’t work either are the various UK terrestrial channels via internet as they are region locked to the UK, although a VPN might get around that. On the TV front, we found that Australian terrestrial TV is almost entirely dire and has the feel of just a whole lot of shopping channels (even Wendy agrees with the dire verdict and she’s Australian!).

I’d also like a study/library which doesn’t seem to be an issue as most of the properties we’ve looked at come with a whole range of rooms outside the usual bedroom, living, kitchen, and bathroom categories.

Sounds daft, but in addition to the normal kitchen, it’s been suggested that a kind of ensuite kitchen for the various non-standard kitchen items would be handy (for the air fryer, popcorn machine, blender, etc.). That said, most of the kitchens are much larger than what we’re used to so this isn’t likely to be an issue. Junior #2 suggested a walk-in pantry as we’d be living “in the wilds” which sounds handy and we’d one in France, but we’re probably not going to be living “in the wilds” as such.

There’s also been some requests for things like space for chickens, vegetable garden, and similar but since we’re looking for a minimum of two hectares (four acres in old money), that doesn’t look like it’ll be an issue.

The water supply isn’t something we’d initially given much thought to. Turns out that most of the properties we’ve looked at are on town water. A little further out is tank water which means you’ve a big tank that the local authority fills up for you now and again for a fee. If you’re on tank water, I imagine that you’re also on a sceptic tank which they can pump out too, though you shouldn’t need them to do that if you’ve sized it properly.

We’ve been getting grocery deliveries for a few years now and that service is available from, mainly, Coles and Woolworths in Australia so long as you’re within their service distance (about 20/30 minutes drive from the nearest store). You can check out availability for that by popping in the postcode of the property that you’re looking at. Again, not a show stopper, but nice to know if it’s available before you move.

And that lot is after just a few months of taking the move seriously! I’m sure there’ll be more requirements arising over the time running up to 2027.

Copyright © 2004-2014 by Foreign Perspectives. All rights reserved.

OK, so we’re intending to move to Australia, but where?

Location is something that we’ve thought about a fair bit. As in our move to France, we want somewhere that has a “bumpy” landscape. Bumpy doesn’t mean mountainous, but rather not boringly flat i.e. some hills, but probably not actual mountains or at least not mountains that we need to cross regularly.

We also want it to be not too far from water which could mean near a river, lake, or even the sea. One key think that we found in France is that if you’re more than about a 90 minute drive from the sea then you have a continental climate which, in France, meant very hot summers and very cold winters, whereas within that 90 minute range the weather was quite reasonable all year. Although Australian climates can be quite different, Tasmania is fairly similar to France so that 90 minute or so distance will similarly change the climate: it snows in Tasmania, but mostly in places more than 90 minutes from the sea.

Together, the above still leave Launceston and Hobart in the frame as they’re both in reasonably bumpy landscapes and less than 90 minutes from the sea.

Copyright © 2004-2014 by Foreign Perspectives. All rights reserved.

If you’re like me, you’ll have a range of non-digital images lying around including prints, slides, VHS tapes, and DV tapes. The resolution of the various affordable scanners has now reached the point where it’s something you’ll only need to do once rather than needing to repeat it in a few years when the resolution gets higher. So in increasing order of difficulty, here’s how you do it…

Prints are by far the easiest to deal with. Most people will have one of those all in one printer/scanners and that’s the way to go. Depending on your computer setup, you may need to install some additional software, for example in my case the scanner software was part of the HP printer software and it was already installed. Two things you need to do are to firstly print a plain coloured page that you’ll use as the background to all your scans and secondly to set the resolution to the highest (300dpi will work fine as prints are generally not printed at a higher resolution than that).

What you do is place your photos on the scanner (face down), put the background sheet behind them, and then scan them and save as JPG images. This will produce an image with, in my case, a blue background behind them. That blue background is there so that it’s easier to select the image that you want. I use Gimp (which is free) for selecting the image from the background and tidying up the image e.g. livening up the colours from a faded colour print or to modernise a black and white print. This made a massive difference on some of my images. One important point is to save the original saved image rather than just those you’ve improved.

Slides and negatives will require you to purchase a slide scanner. There isn’t a massive choice in these at the moment as people have, by and large, gone digital. You can spend thousands on them but in reality for home scanning what you need is the KODAK RODFS70 Slide scanner at around £180 or a more up to date model of that if there’s such a thing by the time you’re reading this. There are cheaper (£50-ish) scanners, but they have much lower resolution and somewhat slower: the Kodak one weighs in at 22mp which is plenty for slides and you can scan a box of 36 slides in around 7 minutes. Worth noting is that some of the much more expensive scanners are a lot slower as they do a scan of your slide in the same way as the print scanners do i.e. it takes a minute or so per slide vs the seconds that the Kodak model takes (it takes a photo of your slide using a very small camera, hence the seconds rather than minutes). You need to buy an SD card to go along with the scanner and it doesn’t require a computer during the scanning process. Slides scanned using this come out brilliantly on large screen TVs. One thing to watch during the scanning is that the brightness range of the Kodak scanner is less than that of the slides so if you’re scanning something with a very bright detail on it then you’ll need to adjust the brightness on the scanner but I found that was only required on a few slides out of the thousands that I scanned.

Videos (VHS or Betamax) aren’t much more complicated than slides but, again, you will need some items of hardware. First is something to actually play your video with (preferably the original camcorder), and secondly a USB Video Capture device (about £10). If you’ve lost the original camcorder, you can buy one on ebay for around £50. Basically, you connect the leads on your USB capture device to the camcorder, fire up appropriate recording software on your computer, and press play. There’s a wide range of software that will do this, but the free VLC should work just fine.

Digital Video is something that should be simple as it’s digital already. At one time it was but the Firewire interface that’s required has been discontinued on all PCs from around 2012 i.e. a good while ago. You could use the same approach as for VHS tapes described above, but you’ll lose a lot of resolution and it seems a shame given that DV video is already digital. As above, you will need a camcorder to play the tape, which can be bought on ebay if needbe.

In the absence of a firewire port on your PC, what you need to do is either buy a Pinnacle USB Moviebox (the 500-USB or 700-USB) on ebay (I used the 510-USB) and use the Pinnacle Studio software (around £50, but if you’re as organised as I was, you could copy all your DVs in the free trial period) and you’ll also need the driver for your Moviebox which you can get from https://cdn.pinnaclesys.com/SupportFiles/Hardware_Installer/readmeHW10.htm (it works on Windows 11). Alternatively, you could buy a pre-2012 Mac with a Firewire port and that should be able to read directly from the DV i.e. you won’t need the Pinnacle software or Moviebox. As with the VHS options, you fire up the recording software and press play, the main difference being that the Pinnacle software can control the camcorder so you usually get a clean copy of the recording, though occasionally I found that the automatic cutoff missed bits so I had to do it manually.

All copied, so what’s next? Well, now that you’ve gone through all the work above, you don’t want to lose your digital copies so I’ve them copied onto a WD My Passport Ultra. Get the Ultra rather than the normal one as it is much faster: copying 1.5TB took over 11 hours on the normal vs around 5 hours on the Ultra as it uses USB-C.

If you’ve any questions, add them in the comments and I’ll try to answer them. I think you’ll find this is the only comprehensive guide to getting your images and videos into digital form, or at least I couldn’t find one (and I looked a LOT).

Copyright © 2004-2014 by Foreign Perspectives. All rights reserved.